32 00... Test conditions for chassis/wheel alignment check
WARNING: This page is about a different car, the 2010 BMW 528i, 2009 BMW 528i, and 2008 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.
Observe the following test conditions prior to the chassis/wheel alignment check:
- Correct and identical rim and tire sizes.
- Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
- Correct tire inflation pressure (see instruction plate on car).
- Wheel bearing clearance OK
- Steering backlash OK
- Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
- Cars with ride level control: Pull fuse of air supply unit so that there is no controlling down or up.