61 71 061 Replacing (Removing And Installing) Fluid Reservoir For Windscreen Washer Unit
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove LEVEL SWITCH
- Remove WINDSCREEN WASHER PUMP
- If necessary, remove WASHER PUMP for headlight washer system
Release screws (1) on fluid reservoir for windscreen washer unit.
Release screw (1) and pull fluid reservoir for windscreen washer unit (3) forward in direction of arrow slightly.
Disconnect filler hose (2).
If necessary, detach hose for headlight washer system from fluid reservoir for windscreen washer unit (3).
Remove fluid reservoir for windscreen washer unit (3).
Installation:
- Replace strainers on washer pumps
- Coat sealing rings of washer pumps with antiseize agent
- Lay lines of washer pumps without kinks and clip into holders on fluid reservoir
- Fill fluid reservoir