Clutch Component Grease
WARNING: This page does not describe the selected car, but rather 79 other vehicles, including the 2010 BMW Z4, 2010 BMW X6 M, 2010 BMW X6, 2010 BMW X5 M, and 2010 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Use UNIREX S2 (replaces Klueber Microlube GL 261) for the lubrication of splines on the transmission input shaft, lubricating groove of the clutch release bearing, piston rod sleeve, clutch master cylinder and front push rod of the clutch slave cylinder.
UNIREX S2 Grease BMW Part No. 83 23 9 416 138
As of 11/93 the clutch release bearings are available as a replacement part which have plastic sliding sleeves instead of aluminum. Such updated bearings should not be lubricated at all. This applies to all models with manual transmission except for 8 Series models.