86 21 ... Removing Side Lid Hinge
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove side lid, refer to 86 21 ... REMOVING LID .
Remove gas spring, remove gas spring on hinge side only, refer to 86 21 ... REMOVING GAS SPRING .
Remove gas spring, remove gas spring on hinge side only, refer to 86 21 ... REMOVING GAS SPRING .
Unscrew bolt (1). Remove hinge (2). If fitted, remove spacer plate(s) (3).
Installation:
Pass screws (1) again through spacer tubes. Reinstall existing spacer plate(s) in its/their original position(s). Use new self-locking nuts.
Tightening Torque. Refer to TRAILERS - TIGHTENING TORQUES - ALPINA .