86 10 ... Disassembly Of Left And Right Lamp Housings

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Cut through sealing compound (1) and remove.

Drill out rivet connections (2).

Installation:

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Sealing Compound And Rivet Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Drill out rivet connections (1).

Raise side sections (2, 3).

Pull out lamp housing (4) towards inside in direction of platform.

Fig 2: Identifying Rivet Connections, Side Sections And Lamp Housing

Courtesy of BMW OF NORTH AMERICA, INC.