66 54 005 Removing And Installing/Replacing Control Unit For Night Vision System

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Disconnect negative battery cable. See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
Remove safety information module . See 65 77 700 REMOVING AND INSTALLING (REPLACING) SAFETY INFORMATION MODULE .

Disconnect plug connection (1), press lug (2) downwards and remove control unit (3) from module carrier.

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out coding/programming . See VEHICLE PROGRAMMING AND CODING .

NOTE: New component contains a CD with deblocking code.
CD is requested during coding/programming by the SSS.