65 77 541 Removing And Installing/Replacing Front Left Or Right Acceleration Sensor
WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Acceleration sensor only fitted in US version!
Necessary preliminary tasks:
- Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM .
Disconnect plug connection (1).
Release screws (2) and remove acceleration sensor (3).
Installation:
Tightening torque . Refer to AUDIO, NAVIGATION AND ANTI-THEFT - TIGHTENING TORQUES -- ALPINA
Replace screws (2).