LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1708 (General Electrical System - Repair) >> 31 Switch >> 61 31 035 Removing And Installing/Replacing Stalk For Steering Column Adjustment

61 31 035 Removing And Installing/Replacing Stalk For Steering Column Adjustment

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Remove lower section of steering column trim.  See 32 31 020 REMOVING AND INSTALLING / REPLACING LOWER SECTION OF STEERING COLUMN TRIM .

Remove trim (1) in direction of arrow.

Fig 1: Identifying Lower Section Of Steering Column Trim
G04768551Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Fig 2: Identifying Plug Connection
G04768552Courtesy of BMW OF NORTH AMERICA, INC.

Unlock steering column adjustment switch (1) on both sides and press out of trim (2).

Installation: 

Mounts (3) must not be damaged.

Fig 3: Identifying Steering Column Adjustment Switch On Both Sides
G04768553Courtesy of BMW OF NORTH AMERICA, INC.