61 71 015 Removing And Installing/Replacing A Spray Nozzle In Windscreen Washer System

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Unlock retaining clip for water hose (1) and detach water hose in direction of arrow.

Disconnect plug connection (2) and detach in direction of arrow.

Press spray nozzle (3) in direction of arrow (A) and remove at top in direction of arrow (B).

Fig 1: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining lugs (1) must not be damaged.
Check adjustment of spray nozzles and correct if necessary. See 61 71 004 ADJUSTING WINDSCREEN WASHER SPRAY NOZZLES .

Fig 2: Identifying Retaining Lugs
Courtesy of BMW OF NORTH AMERICA, INC.