32 41... Replacing Level Switch For Dynamic Drive Fluid Reservoir

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Unscrew nuts.

Remove shims.

Installation:

Replace self-locking nuts.

Tightening torque. See STEERING AND WHEEL ALIGNMENT - TIGHTENING TORQUES .

Fig 1: Locating Dynamic Drive Fluid Reservoir Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Raise and/or turn fluid reservoir in order to gain better access to plug connection.

Disconnect plug connection (1).

Turn level switch (2) through approx. 45° and remove towards bottom.

Fig 2: Disconnecting Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.