31 10 010 Removing And Installing/Replacing Reinforcement Plate
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe safety when raising the vehicle.
Driving without reinforcement plate is not permitted!
Driving without reinforcement plate is not permitted!
Release bolts (1) for assembly underside protection at front.
Release bolts (2).
Remove reinforcement plate (3).
Installation:
Replace screws.
Tightening torque. See FRONT AXLE - TIGHTENING TORQUES .