7.1 Measuring options
WARNING: This page is about a different car, the 2007 BMW 530xi, 2007 BMW 525xi, 2006 BMW 530xi, and 2006 BMW 525xi. However, it is still accessible from the selected car via links, so may be relevant.
An overview of all measuring options and values (VA = front axle, HA = rear axle) is shown below.
MEASURING OPTIONS SPECIFICATION
| Measuring options | Measuring accuracy | In measuring range | Total measuring range |
|---|---|---|---|
| Total wheel toe (VA + HA) | ± 2' | ± 2° | ± 18° |
| Single wheel toe (VA + HA) | ± 2' | ± 2° | ± 9° |
| Camber (VA + HA) | ± 1' | ± 3° | ± 10° |
| Wheel displacement (VA) | ± 2' | ± 2° | ± 9° |
| Geometrical drive axis | ± 2' | ± 2° | ± 9° |
| Castor | ± 4' | ± 18° | ± 22° |
| Kingpin inclination | ± 4' | ± 18° | ± 22° |
| Toe-differential angle | ± 4' | ± 20° | ± 20° |
| Maximum steering angle (VA) | ± 4' | ± 60° | ± 300° |
| Maximum steering angle (HA) | ± 4' | ± 9° | ± 9° |
| Castor correction range | ± 4' | ± 7° | ± 10° |
NOTE:
The measuring accuracy details only apply when using the precision rotating and sliding plates as well as the BMW quick-acting clamps.