11.3 Procedure (Bosch)
WARNING: This page is about a different car, the 2007 BMW 530xi, 2007 BMW 525xi, 2006 BMW 530xi, and 2006 BMW 525xi. However, it is still accessible from the selected car via links, so may be relevant.
- Go to the "Administration" screen
- Select the KDS button
- Select Bosch
- Label "Diskette 3.1", insert it into the drive on request and confirm with "OK" (2x) --> Setpoint data is copied to the diskettes.
- Insert setpoint data diskette 3.1 into the 3.1 floppy disk drive, insert operating system diskette 3.0 into the 3.0 drive.
- Switch on the machine in the usual manner.
IMPORTANT:
When creating the KDS diskettes, all data on the diskettes used is overwritten.
NOTE:
In the event of an error, a corresponding message is shown and the program is cancelled completely. The procedure must be run from the beginning again and all data on the diskette will be deleted. A new diskette may have to be used.