61 71 100 Removing And Installing/Replacing Windshield Washer Pump

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Drain fluid reservoir for windshield washer system

Remove front underbody protection.

Detach front left wheel arch trim in front area and fold back.

Remove bottom left cover.

Disconnect plug connection (1).

Detach hose (2) from windshield washer pump (3).

Pull windshield washer pump (3) up and out of fluid reservoir for windshield washer system (4).

Fig 1: Identifying Hose, Windshield Washer Pump And Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for windshield washer pump.

If necessary, coat sealing ring of windshield washer pumps with antiseize agent.

Ensure hose is laid without kinks.