LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1350 (General Electrical System - Repair) >> 31 Switch >> 61 31 006 Removing And Installing (Replacing) Fixture For Steering Column Stalk

61 31 006 Removing And Installing (Replacing) Fixture For Steering Column Stalk

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Move wheels into straight-ahead position and do not alter this position during the repair work.

Necessary preliminary tasks: 

NOTE: Comply notes and instructions on handling fibre optic cables  . See 61 00 ... NOTES ON HANDLING OPTICAL FIBERS .

Release screws (1).

Pull out fixture for steering column stalk (2) in direction of arrow.

Disconnect plug connections behind and remove fixture for steering column stalk (2).

Fig 1: Identifying Steering Column Stalk And Screw
G04768540Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

NOTE: Illustration shows fixture for steering column stalk installed.

Release screws (1).

Remove steering column control (2).

Fig 2: Identifying Steering Column Control And Screw
G04768541Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding  . See VEHICLE PROGRAMMING AND CODING .

Carry out steering angle sensor adjustment  . See 61 31 996 CARRY OUT STEERING ANGLE SENSOR ADJUSTMENT .