Steering-Column Memory
WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
The position of the steering column in each direction of adjustment is recorded by a Hall sensor. This position is stored in the centre console switch cluster (SZM). This allows the Key Memory to call up the position of the steering column for up to 4 vehicle keys.
The tilt adjustment moves to the uppermost position to make it easier to get in and out of the vehicle.
For the easy-access facility, the steering-column adjustment is automatically actuated under the following conditions:
- Terminal R OFF
- Terminal R ON and driver's door opened (via door contact)
- Terminal 15 OFF with driver's door open (via door contact)
The steering-column memory is activated under the following conditions:
- One of the two memory buttons for the seat-mirror memory and the steering-column memory on the seat is pressed (from terminal R OFF).
- Another remote control is used (personalisation). Condition: The selection "Last seat position after unlocking" is activated in the "Settings" menu in the Central Information Display (CID) (from 09/2003).
In both cases, the steering-column memory will not move the steering column to the stored position until terminal 15 is switched ON.