LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1320 (Steering And Wheel Alignment -- Service Techniques) >> 32 Steering And Wheel Alignment >> 11. Updating The Software / Setpoint Data >> 11.2 Procedure (Beissbarth)

11.2 Procedure (Beissbarth)

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Go to the "Administration  " screen
  2. Select the KDS button 
  3. Select Beissbarth 
  4. Insert "Diskette 1  " on request and confirm with "OK  " (program diskette 1 of 2 is created, label it)
  5. Insert "Diskette 2  " on request and confirm with "OK  " (program diskette 2 of 2 is created, label it)
  6. Insert "Diskette 3  " on request and confirm with "OK  " (setpoint data diskette 1 of 3 is created, label it)
  7. Insert "Diskette 4  " on request and confirm with "OK  " (setpoint data diskette 2 of 3 is created, label it)
  8. Insert "Diskette 5  " on request and confirm with "OK  " (setpoint data diskette 3 of 3 is created, label it)
  9. Perform update and/or setpoint data on the KDS in the usual manner with the diskettes which have just been created.
scientia non olet · About LEMON Manuals