32 32 170 Removing And Installing / Replacing Interlock Cable (Vehicles Up To 09/2005)

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove TRIM FOR STORAGE TRAY
Remove front insert for ashtray

After installation:

Adjusting INTERLOCK CABLE

Release screw (1) and remove bracket (2).

Move interlock cable (3) to left and then remove towards front.

If necessary, secure cord/cable to interlock cable (3).

Fig 1: Identifying Interlock Cable And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT:

Do not kink interlock cable.

Turn guide sleeve (1) through approx. 45°.

Remove interlock cable (2) from steering column and pull out.

If necessary, remove cord/wire from interlock cable (2).

Fig 2: Identifying Interlock Cable And Guide Sleeve

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement only:

Tie cord/wire to end of new interlock cable.