61 67 010 Removing and Installing/Replacing Washer Pump Of Headlight Washer System

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

If necessary, remove left front wheel . See 36 10 300 REMOVING OR INSTALLING FRONT OR REAR WHEEL
Remove front underbody protection . See 51 47 490 REMOVING AND INSTALLING / REPLACING FRONT UNDERBODY PROTECTION

NOTE: For purposes of clarity, illustration shows front wheel removed.

Release screws.

Fold back wheel arch trim (1) in direction of arrow.

Fig 1: Identifying Back Wheel Arch Trim

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Catch any escaping washer fluid if necessary.

Disconnect plug connection (1).

Unlock hose (2) and detach from washer pump of headlight washer system (3).

Turn washer pump of headlight washer system (3) and pull in direction of arrow out of fluid reservoir for windscreen washer unit (4).

Fig 2: Identifying Headlight Washer System, Plug Connection & Headlight Washer System

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for washer pump
If necessary, coat sealing ring of washer pump with antiseize agent
Ensure hose is laid without kinks.
Fill fluid reservoir