61 31 023 Removing and Installing/Replacing Start/Stop Switch
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 340
Attach special tool 00 9 340 as shown in Fig 1.
Unclip Start/Stop switch (1) with associated ribbon cable.
IMPORTANT:
Carefully unlock and disconnect associated plug connection for ribbon cable.
Replace the ribbon cable if damaged.
Remove Start/Stop switch (1).