32 00... Moving vehicle into normal position
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Check compliance with test conditions, bring vehicle to a stop if necessary.
- Version with air spring system: Carry out ride-height-calibration
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load into vehicle. See FRONT AXLE - RIDE HEIGHT .
- Determine vehicle ride height NOTE: If the vehicle ride height is not inside the tolerance (refer to Technical Data article), the vehicle must be repaired (coil spring/leakage). See FRONT AXLE - RIDE HEIGHT .