32 31 004 Removing and installing / replacing upper section of steering column trim

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove LOWER SECTION OF TRIM
Move steering column into "lower" and "extended" position

Unclip steering column cover (1) from upper section of trim.

Fig 1: Identifying Steering Column Cover From Upper Section Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Installation:

Replace expansion rivets.

Fig 2: Identifying Expansion Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Bend upper section of trim on both sides outwards and remove towards top.

Fig 3: Identifying Bend Upper Section Of Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Locks (2) must engage in hooks (1) on both sides.

Fig 4: Identifying Locks Engage In Hooks

Courtesy of BMW OF NORTH AMERICA, INC.