LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2013 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1024 (General Electrical System - Repair) >> Switch >> 61 31 005 Removing and installing/replacing fixture for steering column stalk

61 31 005 Removing and installing/replacing fixture for steering column stalk

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 325Ci, 2005 BMW 325xi, 2005 BMW 325i, 2005 BMW 325Ci, and 2004 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Move wheels into straight-ahead position and do not alter this position during the repair work. With steering wheel removed, do not under any circumstances turn/twist fixture for steering column stalk!

Necessary Preliminary Tasks: 

Disconnect plug from ring antenna.

Fig 1: Disconnecting Plug From Ring Antenna
G03165867Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug from wiper switch.

Fig 2: Disconnecting Plug From Wiper Switch
G03165868Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug from turn indicator/dipping switch.

Fig 3: Disconnecting Plug From Turn Indicator/Dipping Switch
G03165869Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove fixture for steering column stalk.

Fig 4: Removing Fixture For Steering Column Stalk
G03165870Courtesy of BMW OF NORTH AMERICA, INC.
WARNING: When removed, the cover (1) of the fixture for the steering column stalk (2) is secured against turning/twisting by the lock (3). Do not under any circumstances twist the cover (1) out of its centered position against the fixture for the steering column stalk (2).
Fig 5: Identifying Steering Column Stalk Lock
G03165871Courtesy of BMW OF NORTH AMERICA, INC.