LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2012 >> Cooper Works, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 3472 (Steering And Wheel Alignment - Repair) >> Electronic Chassis Alignment >> 32 00... Test conditions for chassis/wheel alignment check

32 00... Test conditions for chassis/wheel alignment check

WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.

Observe the following test conditions prior to the chassis/wheel alignment check:

  1. Only BMW approved wheel and tire combinations are installed on the vehicle.
  2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1 2 mm.
  3. Correct tire pressure (see label on vehicle).
  4. All chassis and suspension components must be technically OK.
  5. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
  6. Vehicles with self-levelling suspension: Pull fuse of air supply system so that there is no controlling down or up.
scientia non olet · About LEMON Manuals