Mounting engine on assembly stand
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
IMPORTANT:
Aluminium screws/bolts must be replaced each time they are released .
The end faces of aluminium screws/bolts are painted blue for the purposes of reliable identification.
Risk of damage!
Jointing torque and angle of rotation must be observed without fail.
Necessary preliminary tasks:
- Remove engine.
Mount engine with special tool 11 8 541 to special tool 00 1 450.
Mount engine or engine block with special tool 11 8 542 to 11 8 541.