Subsequent Treatment Of Weld Joints

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

When grinding a weld seam, do not grind thin the base material next to the seam.
After joining, clean all weld seams and spots with a stainless steel wire brush.
Remove burnt paint with a stainless steel wire brush.
All weld joints sealed off with body sealing compound in original state must be primed and sealed off again thoroughly after repairing. Replace damaged or removed anti-drumming layers.