64 52 A/C Compressor
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
A/C COMPRESSOR - TORQUES SPECIFICATION TABLE
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E36/7 M54, E36/7 S54, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | M8 | - | 20 Nm |
| 2AZ Filler plug, A/C compressor | E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | - | - | 30±1 Nm |
| 3AZ A/C compressor to carrier | M67TU, M54, N62, S85, N54 | M8 | - | 21 Nm |
| - | N45, N46, M47T2, M57TU, M57T2 | M8 | - | 19 Nm |
| - | N52K | M8 x 87 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | - | Torque angle | 180±15° |
| - | N52K | M8 x 52 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | - | Torque angle | 90±15° |
| - | N52 | M8 x 87 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | Torque angle | 180±15° | |
| - | N53 | M8 x 52 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | - | Torque angle | 90±15° |
| - | N53 | M8 x 87 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | - | Torque angle | 180±15° |
| - | E85 S54, E86 S54 | - | - | 20 Nm |
| 4AZ Belt pulley/hub to A/C compressor | M47T2 | - | - | 35±5 Nm |
| 5AZ Bracket, A/C compressor to lower crankcase | N54 | - | - | 19 Nm |
| 6AZ Cable holder to A/C compressor | M47T2 | - | - | 3 Nm |
A/C COMPRESSOR - TORQUES SPECIFICATION TABLE
| - | Type | Thread | Tightening Specification | Measure |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E70, E71 | M8 | - | 21 Nm |
| - | E60/N47, E61/N47, E81, E82, E87, E88, E90/N47, E91/N47, E92/N47 | M8 | - | 18.5 Nm |
| - | E92/S65 | M8 | - | 21 Nm |
| 2AZ Filler plug, A/C compressor | E70, E71 | - | - | 30±1 Nm |
| - | E81/N43, E82, E88 | - | - | 25 Nm |
| 3AZ A/C compressor to carrier | E70 | M8 x 15 | - | 20 Nm |
| - | N52, N52K | M8 x 87 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | - | Torque angle | 180±15° |
| - | N52, N52K | M8 x 52 | Replace aluminum screw/bolt | - |
| - | - | - | Jointing torque | 10 Nm |
| - | - | - | Torque angle | 90±15° |
| - | E81/N43, E88 | - | - | 23 Nm |
| - | E82/N47, E90/N47, E91/N47, E92/N47 | - | - | 19 Nm |
| - | E71/N54 | M8 x 85 | - | 19 Nm |
| - | E71/M57 | M8 x 85 | - | 19 Nm |
| - | E71/N63 | - | M8 x 95 | 21.4±3.2 Nm |
| - | E71/N63 | M8 x 55 | - | 19 Nm |
| 4AZ Bracket, pressure line, to compressor | E82/N54 | - | - | 7.6 Nm |
| 5AZ Bearing block, compressor, to crankcase | E70/E71 | - | - | 19 Nm |