86 10 Platform
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 535xi, 2010 BMW 535i, 2009 BMW 535xi, 2009 BMW 535i, and 2008 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - PLATFORM
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Nut to retaining thread, rear light | - | M5 | - | 7 Nm |
| 2AZ Bar to platform | - | M8x35 | - | 23 Nm |
| 3AZ Lashing plate to platform | - | M8x35 | - | 15 Nm |
| 4AZ Front guard to cross-member | - | M8x55 | - | 28 Nm |
| 5AZ Front guard to longitudinal member | - | M8x25 | - | 34 Nm |
| 6AZ Saucer head screw to rail | - | M5x15 | - | 7 Nm |
| 7AZ Rail, loading ramp frame to cross strut | - | M6x16 | - | 11.5 Nm |
| 8AZ Rail, loading ramp frame to longitudinal member mount | - | M6x16 | - | 11.5 Nm |
| 9AZ Cross strut to rail | - | M6x16 | - | 5.5 Nm |
| 10AZ Footplate to drawbar member | - | M6x25 | - | 11.5 Nm |
| 11AZ Bracket to drawbar member | - | M8x25 | - | 34 Nm |
| 12AZ Wiring harness mount to reversing housing | - | M10x1x20 | - | 58 Nm |
| 13AZ Socket holder to drawbar | - | M10x95 | - | 55 Nm |
| 14AZ Top reversing housing and bracket to drawbar member | - | M10 | - | 55 Nm |
| 15AZ Towing attachment to tow tube | - | M12x70 | - | 96 Nm |
| 16AZ Drawbar member to crossmember | - | M8x20 | - | 28 Nm |
| 17AZ Cross-member to drawbar member | - | M8x25 | - | 40 Nm |
| 18AZ Drawbar member to crossmember | - | M8x25 | - | 28 Nm |
| 19AZ Disk wheel to brake hub | - | - | - | 100 Nm |
| 20AZ Brake hub to axle | - | - | - | 280 Nm |
| 21AZ Shock absorber to bracket | - | M12x55 | - | 96 Nm |
| 22AZ Trailing arm to coil spring | - | M10x35 | - | 46 Nm |
| 23AZ Coil spring to longitudinal member | - | M10x25 | - | 46 Nm |
| 24AZ Wheel brake to trailing arm | - | M10x1.5x30 | - | 145 Nm |
| 25AZ Trailing arm to mount | - | M12x85 | - | 96 Nm |
| 26AZ Rear apron to bracket | - | M8x25 | - | 26 Nm |
| 27AZ Bracket to mounting bracket | - | M6x16 | - | 11 Nm |
| 28AZ Rotary striker lock to cross strut | - | M8x35 | - | 18 Nm |
| 29AZ Bearing pedestal to loading ramp frame | - | M6x16 | - | 10 Nm |
| 30AZ Outer towbar mount to longitudinal member | - | M10x25 | - | 55 Nm |
| 31AZ Mounting bracket to longitudinal member | - | M10x25 | - | 78 Nm |
| 32AZ Base plate to cross-member | - | M10x35 | - | 78 Nm |