32 00 610 Adjusting toe-in and camber on front axle: Notes
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
Changes in axle geometry caused by accidents must under no circumstances be rectified by camber adjustment!
NOTE:
Camber and toe-in influence each other.
Adjust the toe-in first in order to simplify the adjustment procedure.
The centering pin may only be removed if the camber is outside the specified tolerance after toe adjustment.
Adjust the toe-in first in order to simplify the adjustment procedure.
The centering pin may only be removed if the camber is outside the specified tolerance after toe adjustment.