32 31 004 Removing and installing / replacing upper section of steering column trim

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 BMW 530i, 2007 BMW 525i, 2006 BMW 530i, 2006 BMW 525i, and 2005 BMW 530i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove lower section of trim .
Move steering column into "lower" and "extended" position

Unclip steering column cover (1) from upper section of trim.

Fig 1: Unclipping Steering Column Cover From Upper Section Of Trim

G03261126

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten screws.

Installation:

Replace expansion rivets.

Fig 2: Replacing Expansion Rivets

G03261127

Courtesy of BMW OF NORTH AMERICA, INC.

Bend upper section of trim on both sides outwards and remove towards top.

Fig 3: Bending Upper Section Of Trim On Both Sides Outwards

G03261128

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lock (2) must engage in hooks (1) on both sides.

Fig 4: Ensuring Lock Engages In Hooks On Both Sides

G03261129

Courtesy of BMW OF NORTH AMERICA, INC.