66 31 016 Removing and installing/replacing long-range sensor (LRR sensor): Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove ORNAMENTAL GRILLE for bumper panel, middle.
Version with Sports package only:
Remove NUMBER/LICENSE PLATE BASE PLATE

(number/license plate baseplate conceals sensor adjusting screw)

IMPORTANT: Secure LRR sensor (2) against falling out.
Cover bumper in working area (1) with adhesive tape.

Using special tool 00 9 317 unclip LRR sensor (2) from brackets on both sides.

Installation note:

LRR sensor must be felt and heard to snap into place.

Fig 1: Removing LRR Sensor From Brackets Using Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure LRR sensor (1) against falling out.

Disconnect plug connection (2) and remove sensor (1).

Fig 2: Identifying LRR Sensor With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.