61 35 080 Removing And Installing/Replacing Control Unit/Module For Left Or Right Seat Adjustment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage ( ESD protection).

NOTE: Move seat completely towards rear/top.

Unlock metal lug (1) towards front and remove control unit/module for seat adjustment (2) towards bottom.

Disconnect all associated plug connections.

Fig 1: Identifying Unlock Metal Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure control unit/module for seat adjustment (1) is correctly seated in mounting (2).

Guides (3) and metal lug (4) must not be damaged.

Fig 2: Identifying Mounting, Guides & Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding.