84 11 610 Removing and installing/replacing eject box (cordless keypad handset)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

If necessary, remove cordless keypad handset from eject box
Remove fresh-air grille in rear cabin . See 64 22 191 REMOVING AND INSTALLING/REPLACING REAR CABIN FRESH-AIR GRILLE .

If necessary, disconnect antenna plug (1).

Disconnect plug connection (2).

Unlock socket housing on plug connection (2) and slide out contact carrier.

Fig 1: Identifying Plug Connection And Antenna Plug

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Unlock eject box (1) and fold up.

Release screws (2).

Feed out plug connection and remove eject box (1).

Installation:

Ensure correct cable routing in eject box (1).

Fig 2: Identifying Eject Box And Screws

Courtesy of BMW OF NORTH AMERICA, INC.