17 11 046 Removing and installing/replacing module carrier

WARNING: This page is about a different car, the 2009 BMW 528xi, 2009 BMW 528i, 2008 BMW 528xi, and 2008 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove radiator cover
Remove fan cowl with electric fan
Drain coolant
Remove radiator
Draw off fluid from power steering
Installation:

Bleed power steering unit
Unlock hydraulic lines on cooling loop and disconnect
Secure A/C condenser against damage and against falling down.

Fig 1: Identifying Holder And Lock

Courtesy of BMW OF NORTH AMERICA, INC.

Press lock (1) and remove holder (2) downwards.

Illustration shows the left holder: The same procedure applies to the opposite side.

Installation:

Rubber mounts fall out easily, ensure correct installation position.

Fig 2: Identifying Module Carrier

Courtesy of BMW OF NORTH AMERICA, INC.

Remove module carrier (1) towards bottom.

When replacing module carrier: Convert power steering cooling loop .