61 67 010 Removing And Installing/Replacing Washer Pump Of Headlight Cleaning System

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Drain fluid reservoir for windshield washer system

Remove front underbody protection.

Detach front left wheel arch trim in front area and fold back.

Remove bottom left cover.

Disconnect plug connection (1).

Unlock hose (2) and detach from washer pump of headlight cleaning system (3).

Turn washer pump of headlight cleaning system (3) in direction of arrow and pull up out of fluid reservoir for windshield washer system (4).

Fig 1: Identifying Plug Connection And Headlight Cleaning System

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace strainer for washer pump of headlight cleaning system.

If necessary, coat sealing ring of washer pump for headlight cleaning system with anti-seize agent.

Ensure hose is laid without kinks.