61 31 220 Removing and installing/replacing multifunction steering wheel switch
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW Z4, 2007 BMW Z4, 2006 BMW Z4, 2005 BMW Z4, and 2004 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove DRIVER-SIDE AIR BAG MODULE .
NOTE:
Illustrations show multifunction steering wheel (3) removed.
The two multifunction steering wheel switches (2) can be removed independently of each other.
Release associated screw (1).
Unclip corresponding multifunction steering wheel switch (2) in direction of arrow from multifunction steering wheel (3).
Disconnect associated plug connections and remove multifunction steering wheel switch (2).
Installation:
Make sure electrical leads are correctly routed.