11 00 ... Securing Engine In Installation Position With Special Tool (N73)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For Special Tool identification, see ENGINE- SPECIAL TOOLS and MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Special Tools Required:

00 0 200
00 0 201
00 0 202
00 0 203
00 0 204
00 0 208
11 0 000

Necessary Preliminary Tasks:

Remove acoustic cover.
Secure engine hood in service position. Refer to 51 00... SERVICE POSITION OF ENGINE HOOD .

Assemble special tool 00 0 200 with special tools 00 0 201 / 00 0 202 / 00 0 203 / 00 0 204 / 00 0 208 and fit.

Secure special tool 11 0 000 to front and rear lifting eyes and to special tool 00 0 200.

NOTE: The supports (1) of special tool 00 0 208 must rest on the bolt connection of both side walls. Risk of damage .

Fig 1: Assembling Special Tool And Fitting To Engine

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screws (1 and 2).

Fig 2: Tightening Cross Member Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release engine mounts at top left and right.

Raise engine with special tool 00 0 200 approx. 10 mm.

Fig 3: Raising Engine With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.