11 00 ... Mounting Engine On Assembly Stand (N73)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For Special Tool identification, see ENGINE- SPECIAL TOOLS and MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Special Tools Required:

00 1 450
11 0 000
11 0 151
11 0 152
Remove engine. Refer to 11 00 050 REMOVING AND INSTALLING ENGINE (N73) .

Fit engine to special tool 00 1 450:

IMPORTANT: Only raise engine on locating lugs provided for this purpose.

Layout of front engine mount.

Illustrations show N62.

Fig 1: Layout Of Front Engine Mount

G03291764

Courtesy of BMW OF NORTH AMERICA, INC.

Layout of rear engine mount.

NOTE: Illustrations show N62.

Fig 2: Layout Of Rear Engine Mount

G03291765

Courtesy of BMW OF NORTH AMERICA, INC.

Raise engine with special tool 11 0 000.

Fig 3: Raising Engine With Special Tool

G03291766

Courtesy of BMW OF NORTH AMERICA, INC.

Remove carrier bracket on cylinder bank 1 to 6.

Fit special tool 11 0 151 to cylinder bank 1 to 6.

Fig 4: Installing Special Tool To Cylinder Bank 1 To 6

G03291767

Courtesy of BMW OF NORTH AMERICA, INC.

Remove carrier bracket on cylinder bank 7 to 12.

Fit special tool 11 0 152 to cylinder bank 7 to 12.

Fig 5: Installing Special Tool To Cylinder Bank 7 To 12

G03291768

Courtesy of BMW OF NORTH AMERICA, INC.

Install engine in special tool 00 1 450.

Snap locking pin (1) into place.

Close locking detent (2) on right and left and screw down.

Fig 6: Closing Left/Right Locking Detent

G03291769

Courtesy of BMW OF NORTH AMERICA, INC.