61 31 014 Removing and installing/replacing Start/Stop switch
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Incorrectly installed start/stop switch may cause the start/stop switch or MSA button to jam.
In the case of a fault message "Jammed start/stop switch or MSA button" check before replacing whether the start/stop switch has been correctly installed in the cover and is de-energized!
If necessary install the existing start/stop switch again and perform a functional check!
In the case of a fault message "Jammed start/stop switch or MSA button" check before replacing whether the start/stop switch has been correctly installed in the cover and is de-energized!
If necessary install the existing start/stop switch again and perform a functional check!
Necessary preliminary tasks:
Release screws (1) and remove Start/Stop switch (2).
Installation note:
Only F10/F11/F12/F13/F18:
The tab of the start/stop switch (1) be installed below the tab (2)!