LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2012 >> Cooper Base, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 3370 (General Electrical System - Special Tools) >> General Electrical System >> 9040 Tool

9040 Tool

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2015 BMW Alpina B7L xDrive, 2015 BMW Alpina B7 xDrive, 2015 BMW 750i xDrive, 2015 BMW 750Li xDrive, and 2015 BMW 740Li xDrive. However, it is still accessible from the selected car via links, so may be relevant.

0492908 619040 Tool MP

NOTE: (Tool set for repair range IV) [Discontinued]

SI number

02 02 92 (505)

Consisting of:

  1. 4 = 0495195 Die-plate
    NOTE: For crimping 2.5 mm (diameter.) sleeves [Released]
    Fig 1: Identifying Tool (0492908)
    G04739566Courtesy of BMW OF NORTH AMERICA, INC.
  2. 1 = 0492909 Pliers
    NOTE: (hand pliers without matrix) [Released]
  3. 2 = 0492910 Die-plate
    NOTE: For crimping butt connectors and contact tubes for comb connectors (0.35 - 0.5" 0.75 - 1.00" 1.5" 2.5) [Released]
  4. 2 = 0492911 Pliers
    NOTE: (insulation strippers with wire cutter) Replaced by "MultiStrip 10" insulation strippers with BMW order number 81 69 0 416 257. For all information, see Service Information 08 05 06 259. [Discontinued]
  5. 4 = 0493149 Die-plate
    NOTE: For crimping aerial connector (plug connection, aerial cable/radio) [Released]