61 31 996 Carry out steering angle sensor adjustment

WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "Initial operation/adjustment for active front steering" and must not be carried out separately! Refer to 32 10 005 ADJUSTMENT FOR ACTIVE FRONT STEERING .

NOTE: Steering angle sensor adjustment must be carried out:

After adjustment work on the front axle/steering.
After all mechanical work on the steering system.
After the following components have been replaced/coded:
- Steering column switch cluster.
- DSC control unit.
- ARS control unit.

Connect vehicle to BMW diagnosis system.

Select and carry out steering angle sensor adjustment under Service functions.