61 67 200 Removing And Installing/Replacing Spray Nozzle For Night Vision Camera

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

13 3 010

Necessary preliminary tasks:

Remove FRONT BUMPER TRIM

To prevent excess escape of washer fluid, seal off end of high-pressure line with special tool 13 3 010.

Fig 1: Identifying Special Tool (13 3 010)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE:

Night vision camera removed for purposes of clarity.

Press retainer (1) and detach high-pressure line (2) from high-pressure nozzle.

Fig 2: Pressing Retainer And Detach High-Pressure Line From High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove high-pressure nozzle (2).

Installation:

New spray nozzles are already preset.

Check function.

Fig 3: Removing High-Pressure Nozzle And Screw

Courtesy of BMW OF NORTH AMERICA, INC.