62 30 005 Removing and Installing/Replacing Trim for Head-Up Display

WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317. Refer to00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE)

Lever out trim for head-up display (1) with special tool 00 9 317 (00 9 310 ASSEMBLY WEDGES (SET IN PLASTIC CASE) ) towards top.

Fig 1: Removing Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure detent lugs (1) are correctly seated.

Fig 2: Identifying Detent Lugs

Courtesy of BMW OF NORTH AMERICA, INC.