31 00... Front Axle + Steering: Wheel/Chassis Alignment Check Must Be Carried Out After The Following Work
WARNING: This page is about a different car, the 2010 BMW X5, 2009 BMW X5, 2008 BMW X5, and 2007 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
A wheel/chassis alignment check must be carried out after the following work:
- Release of following screw/bolt connections:
- Steering gear to front axle carrier
- Lower control arm to front axle carrier
- Tie rod end to tie rod
- Replacement of following parts:
- Front axle carrier
- Steering gear
- Swivel bearing
- Tie rod end
- Lower control arm / rubber mount
- Tie rod
- Gaiter (if the tie rod end has to be screwed off)