32 31 020 Removing And Installing/Replacing Lower Section Of Steering Column Trim

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Move steering column in "top" and "extended" position
Unclip front section of steering column trim and bring into contact with steering wheel. See 32 31 010 REMOVING AND INSTALLING/REPLACING FRONT SECTION OF STEERING COLUMN COVER .

NOTE: The front section has been removed to simplify the depiction in the graphics.

Release screw.

Press lower section off steering column with a suitable tool.

Installation:

Replace expansion rivet.

Fig 1: Pressing Lower Section Off Steering Column

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Pins (2) must engage in locks (1).

Fig 2: Engaging Pins In Locks

Courtesy of BMW OF NORTH AMERICA, INC.