32 00... Moving Vehicle Into Normal Position
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Check compliance with test conditions , bring vehicle to a stop if necessary. See 32 00... TEST CONDITIONS FOR CHASSIS/WHEEL ALIGNMENT CHECK .
- Version with air spring system: Carry out ride-height-calibration . See 37 12 012 CARRY OUT RIDE-HEIGHT-CALIBRATION .
- Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
- Introduce DIN load (refer to STEERING AND WHEEL ALIGNMENT - TECHNICAL DATA ) into vehicle
- Determine vehicle ride height
. See 31 33 095 MEASURING RIDE-LEVEL HEIGHT OF VEHICLE
.NOTE: If the vehicle ride height is not inside the tolerance (refer to FRONT AXLE - TECHNICAL DATA ), the vehicle must be repaired (coil spring/leakage).