41 00... Body Gap Dimensions
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 BMW 435i xDrive, 2016 BMW 435i, 2016 BMW 428i xDrive, 2016 BMW 428i, and 2015 BMW 435i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The dimensions specified in this service information are applicable at an object temperature of 20 °C. The aim of adjustment is to achieve a uniform join.
Symmetry of the gaps between left and right sides of the vehicle has top priority.
For door gaps, the maximum deviation between the front and rear door gaps must be 1.0 mm.
No gap dimension are specified for components which cannot be adjusted.
Symmetry of the gaps between left and right sides of the vehicle has top priority.
For door gaps, the maximum deviation between the front and rear door gaps must be 1.0 mm.
No gap dimension are specified for components which cannot be adjusted.
Dimensions in mm
Fig 1: Front Bumper, Headlamp, Hood, Front Fender And Front Pillar Body Gap Dimensions And Measurement Points
- Trim panel, bumper, front
- Engine compartment lid
- Headlight
- Side wall, front
- A-pillar
Fig 2: Front Fender, Front Door, Quarter Panel And Sill Trim Panel Body Gap Dimensions And Measurement Points
- Side wall, front
- Front door:
- Trim panel for entrance
- Rear side wall
Fig 3: Front Roof, Center Roof, Rear Roof, Back Glass, And Header Panel Body Gap Dimensions And Measurement Points
Dimension (a) may have from left to right a difference of max. 1.1 mm.
- Cowl panel
- Roof shell, front
- Center roof shell
- Rear window
- Roof shell, rear
Dimension (a) may have from front to back a difference of max. 1.1 mm.
- Roof shell, rear
- Rear side wall
- Soft top compartment lid
- Rear lid
- Roof shell, rear
Dimension (a) may have from left to right a difference of max. 1.1 mm.
- Rear window
- Soft top compartment lid
- Rear lid
- Bumper
Courtesy of BMW OF NORTH AMERICA, INC.
- Roof shell, front
- Roof shell, rear