Preparation for installation
Prepare plastic nozzle(s) for shaping adhesive bead (when not using the standard nozzle C), can be cut to size during the air drying time.
Lay a sample bead of approx. 50 mm - watch out for formation of bubbles/blisters when hot bonding; if OK, apply immediately to window glass.
- Interruption must be < 5 seconds (incorrect mixture ratio).
Glue cartridge must be vertical to window glass.
Black ceramic glass impermeable to UV light is located on the peripheral zone of the inside edge of the window to protect the adhesive bead.
Ceramic glass must not be damaged and must be treated as follows.
1-day system: Treatment of ceramic glass surface (inside of window):
CERAMIC GLASS SURFACE TREATMENT - 1 DAY SYSTEM
| Adhesive (with BMW/MINI part numbers) | Treatment |
|---|---|
Repair kit Cold/Hot Bonding:
Glue cartridge:
|
|
1-hour system: Treatment of ceramic glass surface (inside of window):
CERAMIC GLASS SURFACE TREATMENT - 1 HOUR SYSTEM
| Adhesive (with BMW/MINI part numbers) | Treatment |
|---|---|
Repair kit:
Glue cartridge:
|
|