Electrical Contact Enhancer
Stabilant 22A evaporates and leaves a thin polymer film which is conductive between the mating surfaces, while staying non-conductive between adjacent pins. At the same time it prevents the formation of any further harmful deposits.
BMW PART NUMBER SPECIFICATION
| Wurth | Part No. 893622 (Stabilant 22A) |
NOTE:
1
: Stabilant 22A must not be used on Oxygen Sensor connectors. To function, oxygen sensors require a flow of oxygen through the terminal connector to the sensor element. Stabilant 22A will affect this flow of oxygen, and will result in irreparable damage to the sensor.
NOTE:
2
: Stabilant 22A must not be used on plug connectors which carry fiber optics. Stabilant 22A may migrate to the fiber optic and attenuate the optical signal.