LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2007 >> Cooper Base, 2D Hatchback, Standard >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Steering And Wheel Alignment - Repair - Cooper & Cooper S (R56) >> Electronic Chassis Alignment >> 32 00... Test Conditions For Chassis/Wheel Alignment Check

32 00... Test Conditions For Chassis/Wheel Alignment Check

Observe the following test conditions prior to the chassis/wheel alignment check:

  1. Only BMW approved wheel and tire combinations are installed on the vehicle.
  2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
  3. Correct tire pressure (see label on vehicle).
  4. All chassis and suspension components must be technically OK.
  5. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc